5W 18V Polycrystalline Solar Panel Used for 12V Home System

Model NO.: KSP-5Wp-18 Size: 240X185X17mm Trademark: Kingsun Origin: Nanjing Material: Polycrystalline Silicon Number of Cells: 36 Specification: CE, TUV
5W 18V Polycrystalline silicon Solar panel used for 12V photovoltaic power home system,
5Watt 5WP 12VDC PV Poly Solar Module
 
Features
1) High Efficiency
2) 12V DC standard output
3) CE Waterproof junction box
4) Lifetime:25 years
5) Warranty:5 years
6) 90% power 10 years
7) 80% power 20 years
 
Specification:

ITEM NO	KSP5W-18
MONO or POLY	POLY
Maximum power (Wp)	5w
Maximum power voltage (V)	17.3V
Maximum power current (A)	0.29A
Open circuit voltage (V)	21.6v
Short circuit current (A)	0.32A
Number of cells (Pcs)	36
Size of module (mm)	240x185x17mm
Maximum system voltage (V)	/
Temperature coefficients of Isc (%)	0.065+/-0.015%/ C
Temperature coefficients of Voc (%)	-(2.23+/-0.1) / C
Temperature coefficients of Pm (%)	-(0.5+/-0.05)/ C
Temperature coefficients of Im (%)	+0.1/ C
Temperature coefficients of Vm (%)	-0.38/ C
Temperature Range	-40 - +85 C
Tolerance Wattage (e.g. +/-5%)	+/-5%
Surface Maximum Load Capacity	60m/s(200kg/sq.m)
Allowable Hail Load	steel ball fall down from 1m height
Weight per piece (kg)	0.6KGS
Junction Box Type	16
Length of Cables (mm)	None
Cell Efficiency (%)	16.93%
Module Efficiency (%)	> 12.79%
Output tolerance (%)	+/-5%
Frame (Material, Corners, etc.)	Aluminum
Standard Test Conditions	AM1.5   100mw/cm2   25 C
Warranty	5 years product warranty and 20 years 80% of power
FF (%)	75%

 Junction Box in proof-water with TUV Certificate
Bypass Diode Rated 15A
Solar Cable & Connector: 4 m² with MC4 connector with TUV Certificate
1.Toughed Glass: The glass is super white cloth grain of toughened glass , the thickness of 3.2mm , the solar cell spectral response range of wavelengths (320-1100 nm), light transmittance over 91% , Ultraviolet light radiation , light transmittance is not falling . Toughened glass is made of components can withstand 25 mm in diameter of hockey hit at a speed of 23 m/s.

2. EVA: 0. 5 mm thickness with high quality EVA film as sealant of solar cell and and the connection between the glass, TPT agent. With high light transmittance and anti-aging ability. Solar cell encapsulation of EVA film after curing performance requirements:
Light transmittance is greater than 90% ; Crosslinking degree is more than 65-85% ; Peel strength (N/cm), glass/film is more than 30 ; TPT/film is more than 15 ; Temperature resistance , high temperature 85° C , low temperature - 40° C .

3. TPT Back-Sheet: the back of the Solar Panel, ageing resistance , corrosion resistance , resistance to ultraviolet radiation, airtight, etc. Basic requirements.

4. Frame: aluminum alloy frame with high intensit , mechanical shock resistance ability

Strong, lightweight aluminum frame design with reinforced sealing and load hold to prevent freezing and warping, and stand against high wind.

Under Standard Test Conditions(STC): Irradiance of 1000W/m2, Am1.5 and 25º C cell temperature
Operating Temperature: -40 ~ +85° C
Storage Temperature: -40 ~ +85°

Contact us if you need more details on Solar Panel. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Solar Module、Solar Power. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Polycrystalline Silicon Solar Module > 5W-115W Polycrystalline Silicon